Skip to main content

Setting up an LG webOS player with the Yodeck Software

Updated this week

Introduction

You are in the right spot if you want to create your Digital Signage player
based on webOS using the Yodeck software.

Remember, though, that this process requires some basic IT skills.


Prerequisites & Compatibility

The Compatibility list for webOS devices is based on the firmware version. Here's a full list of supported firmware versions!

Check the firmware version of any device to see if it is compatible with the Yodeck webOS Software. Here is a list of all the supported TV screens.


1. Turn on the display

2. Set display by “tutorial” (first option after display starts)

Important - Must Read

Please do not skip the LG tutorial. Set the display timezone, time, date, location, and internet connection. Otherwise, the system will not work correctly.

3. Once set, go to Settings -> Ez-settings

4. Select the SI Server Setting

5. In Server Menu, select the following options:

  • Fully qualified domain - ON

    • Type the below link:

    • yodeck.link/webos

Unbranded webOS app

Whitelabel partners can find the latest unbranded webOS app on the site's control panel.

  1. Application Launch mode – Local

  2. Local Application Upgrade – Remote

  3. Application type – IPK

  4. Auto set – OFF

Important

The Auto set - OFF is a mandatory setting. If you leave that to "On," you cannot update the application remotely. Always keep this option OFF.

6. Go up to Local Application Upgrade

7. Select Remote

LG webOS Yodeck installation

8. The app starts downloading and installing

9. Once done, restart the display by pressing the power off and power on buttons on the remote control

Once the display starts with the Yodeck App, a registration code will appear in the middle of the screen.


Registering a Yodeck webOS Player on your Account

After seeing the registration code on your LG TV screen, you must register the player to your Yodeck Account.

  1. Log in to your Yodeck Account and go to the “Screens” section.

  2. Create a new Screen entry by clicking the “+Add Screen” button.

  3. A new window will pop up. Choose the webOS Player option.

  4. In the “Registration Code” field, type in the 9-digit registration code you see on your TV screen and click the “Save” button.

  5. After a minute or so, your player should register with your Yodeck Account, and the assigned content should start showing on the screen.


LG Limitations

Yodeck for LG comes with some limitations compared to the Yodeck RPi Player. See the full list of LG webOS limitations.


Did this answer your question?